What Grit Sandpaper For Sanding Kitchen Cabinets

And for a slightly smoother surface use the macro grit grading near to 80 grits.

What grit sandpaper for sanding kitchen cabinets.

Painted cabinets should get a thorough sanding with 120 grit paper but no matter the finish do a final pass with 220 grit. I used my ryobi orbital sander on all the flat surfaces basically anything it could reach and used the sanding blocks for the smaller harder to reach moldings and corners. Belt sanders come in 3 21 and 4 24 models so you can plan accordingly when looking at the best sandpaper. 180 to 220 grit sandpaper.

Fold it four ways bend it around your fingers and sand with short back and forth motions. On a board just milled to thickness with a well tuned planer you can usually start sanding with 150 grit. In rare cases you may also need to use extra coarse sandpaper 16 to 24 grit where you may want to quicken the task. 100 to 150 grit sandpaper.

This not only cleans the cabinet paint doesn t go on well over grease but the scrubby sponge also roughs up the surface just enough to make the primer stick. Sand the cabinets by hand to prevent gouges and to better reach the nooks in the doors. Medium grit sandpaper makes a good starting point for most projects from sanding unfinished wood to removing old varnish. Start with a medium sandpaper around 100 grit either a sheet of sandpaper or a sanding block.

Cabinet shops rarely use anything but 100 grit sandpaper. Macro grit sandpaper macro grits are a class of abrasives that range from medium to coarse sandpaper calibers. This helps remove scratches or rough spots. They feature mid to low grit numbers.

It s aggressive enough to get the job done but not so aggressive that it leaves scratches that can t be removed. Finer grit sandpaper is great for removing the scratches left by coarser grits on unfinished wood and for lightly sanding between coats of paint. An orbital or palm sander works on flat surfaces but use it with caution to avoid damaging the wood. This is like when initially sanding the hardwood flooring where you do not worry about the smoothness of the surface.

If you bought a presurfaced board you might have to start with 120 grit to remove incidental scratches that were on the board when you got it. Check on wood filler repairs and sand those areas to match. Sanding the kitchen cabinet doors and frames is hard work but pretty straightforward. If you are sanding cabinet doors or drawer fronts then starting at an 80 grit and working to a 120 or 150 grit is a great way to reduce time spent with an orbital sander.

Macro grit sized sandpapers are commonly used on tougher wood and metals and have a stronger clearance. Wipe everything down with a soft rag to remove sanding dust. You can sand by hand if you would like but your arms will probably get pretty tired.